To set up the TSP 100 LAN printer:

  1. Go to B24C_Data > Squads > Squad1 > Printers and copy TSP100_LAN_and_BluetoothSettingTool_V110.zip
  2. Connect to the client’s terminal and paste the TSP100_LAN_and_BluetoothSettingTool_V110.zip to the desktop.
  3. Open the .zip file and run the executable.

For instruction and setup steps, go to:

https://starmicronics.com/help-center/knowledge-base/installing-a-star-tsp100-lan-series-printer-on-windows-os-using-futureprnt/

If the client has a cash drawer plugged into the printer:

  1. Run a test page from the printer.
  2. Copy the MAC Addr to Notepad or Word

Self-test/MAC Addr
Figure 1: Self-test/MAC Addr

  1. Open Paladin on the client’s terminal.
  2. From the main menu, select File > Setup.
  3. Select the Network tab.
  4. In the Network pane, select the printer from the Cash Drawer Interface Type list.

Cash Drawer Interface Type list
Figure 2: Cash Drawer Interface Type list

  1. When this printer is selected, the Star Printer Mac Address list appears. Select the Mac address you copied from the test page.

Star Printer Mac Address list
Figure 3: Star Printer Mac Address list

  1. Click Save, then click Close.

If you have questions or suggestions about this information, contact support@paladinpos.com.

*Content is subject to change. For the most recent version, visit the Help Portal.
Printed on: 3/29/24