How to assign RF printers

Paladin lets you choose a different printer each time you login to an RF terminal. With this, you can mix-and-match RF terminals and RF printers in your store.

To use this feature, you must first add the printers in Paladin. Afterwards, you can select a printer when you login to an RF terminal. If you only have one printer, it will be selected by default.

 To add the RF printers in Paladin: 

1. In Paladin, from the main menu, select File > Setup.
2. Select the Network tab.
3. In the Network pane, select up to four (4) printers from the following lists:
   • RF Attached Printer 1
   • RF Attached Printer 2
   • RF Attached Printer 3
   • RF Attached Printer 4
     Note: The term RF Attached Printer refers to RF portable printers that may or may not be attached using physical cable.
4. It is strongly recommended to physically label each printer with its printer number. For example, label the printer you chose for RF Attached Printer 2 as Printer 2 for easy reference when connecting to an RF device.
5. Click Save, and then click Close.

For instruction on selecting a printer from an RF terminal, see How to select a printer from an RF terminal.